© 2019 by Spectrum Paint Company

1-602-510-2451   |   jrmiller@spectrumpaint.co

Black Label

Black Label Series is the king when it comes to exterior home protection. Formulated to provide excellent durability, color retention, hide, mildew resistance, water and UV protection and adhesion to a variety of substrates makes this product the perfect choice for any home. With thousands of colors to choose from let your imagination be your guide and make your home your dream home!

Available in:

RECOMMENDED USES

  • STUCCO

  • BRICK

  • MASONRY

  • WOOD

  • VINYL

  • CONCRETE

  • SIDING

 

TECHNICAL INFORMATION

RESIN TYPE: 100% Acrylic

 

VOC:

  • Flat ----------- <250 g/l

  • Eggshell ---- <380 g/l

  • Satin --------- <380 g/l

  • Semigloss -- <380 g/l

 

COLORS: Over a thousand to choose from

VISCOSITY: 100 - 105

 

FILM THICKNESS: 3-5 Mils per coat

 

COVERAGE

Apply at the rate of 150-300 square feet per gallon, depending upon the condition, texture and porosity of the substrate.

APPLICATION

SURFACE PREPARATION:

Allow all construction and patching materials to cure completely. Surface must be sound and free of contamination from dirt, wax, oil, grease, etc. If necessary, wash surface with detergent and water then rinse with clean water. Any glossy surface should be lightly sanded to remove the gloss. Remove mildew by washing with a solution of household bleach and wart water then rinsing with clean water.

                  

APPLICATION:

Brush, roll, or spray. 

THINNING: No thinning is recommended.

DRYING TIME:

  • Touch ----------------------- 1 Hour

  • Recoat Spray ------------- 2 Hours

  • Recoat Brush/Roll ------- 4 Hours

CLEAN UP: Soap and water.

 

CAUTIONS, WARNINGS:

Do not apply when surface temperature, or ambient temperature is below 50 degrees F. Do not apply to exterior surfaces when rain is expected within 24 hours. Keep from freezing. Do not take internally. Keep out of the reach of children.