Black Label
Black Label Series is the king when it comes to interior home protection. Formulated to provide excellent durability, color retention, hide, mildew resistance and adhesion to a variety of substrates makes this product the perfect choice for any home or office.
Available in:
RECOMMENDED USES
-
BRICK
-
MASONRY
-
WOOD
-
VINYL
-
SIDING
-
INTERIOR ROOMS
-
CEILINGS
-
BATHROOMS
TECHNICAL INFORMATION
RESIN TYPE: 100% Acrylic
VOC:
-
Flat ----------- <250 g/l
-
Eggshell ---- <380 g/l
-
Satin --------- <380 g/l
-
Semigloss -- <380 g/l
COLORS: Over a thousand to choose from
VISCOSITY: 100 - 105
FILM THICKNESS: 3-5 Mils per coat
COVERAGE
Apply at the rate of 150-300 square feet per gallon, depending upon the condition, texture and porosity of the substrate.
APPLICATION
SURFACE PREPARATION:
Allow all construction and patching materials to cure completely. Surface must be sound and free of contamination from dirt, wax, oil, grease, etc. If necessary, wash surface with detergent and water then rinse with clean water. Any glossy surface should be lightly sanded to remove the gloss. Remove mildew by washing with a solution of household bleach and wart water then rinsing with clean water.
APPLICATION:
Brush, roll, or spray.
THINNING: No thinning is recommended.
DRYING TIME:
-
Touch ----------------------- 1 Hour
-
Recoat Spray ------------- 2 Hours
-
Recoat Brush/Roll ------- 4 Hours
CLEAN UP: Soap and water.
CAUTIONS, WARNINGS:
Do not apply when surface temperature, or ambient temperature is below 50 degrees F. Do not apply to exterior surfaces when rain is expected within 24 hours. Keep from freezing. Do not take internally. Keep out of the reach of children.