Professional Concrete Stain is a 100% acrylic, environmentally friendly stain used to create a superior decorative finish while protecting the surface beneath from water penetration.
Top Professional Concrete Stain with Waterproofing Sealer X to provide a 'wet' look and further increase water repellency and longevity of the coating.
INT/EXT CONCRETE & MASONRY SURFACES
RESIN TYPE: 100% Acrylic
Less than 400 g/l.
COLORS: 9 Industry Standard Colors
FILM THICKNESS: 3-5 Mils per coat
Apply at the rate of 150-300 square feet per gallon, depending upon the condition, texture and porosity of the substrate.
Wash surface as needed to ensure a surface free of dirt, oil, chalk, efflorescence, or other foreign contaminants. After washing, rinse with clean water and allow surface to dry completely. Remove any failing pant by scraping or wire brushing. Clean any defects in the surface and patch with an appropriate cement-patching compound. Open and clean any cracks and fill with a polyurethane caulking compound.
Put into a sprayer of your choice and spray an even layer of stain to the dry surface. Use two or three coats to achieve a desired affect.
Lighter effect: before application first mist the surface with water.
Marbled effect: Use a light color first and let dry. Then spray a darker color while misting with water to assist modeling. Several colors can be used to achieve desired effect. Be sure to let each color dry before continuing.
THINNING: Do not thin.
Touch ----------------------1 Hour
Recoat Spray ------------- 2 Hours
Use (Traffic) ---------------48 Hours
CLEAN UP: Soap and water.
Do not apply when surface temperature, or ambient temperature is below 50 degrees F. Do not apply to exterior surfaces when rain is expected within 24 hours. Keep from freezing. Do not take internally. Keep out of the reach of children.