© 2019 by Spectrum Paint Company

1-602-510-2451   |   jrmiller@spectrumpaint.co

Professional Deck Finish

Professional Deck Finish is a 100% acrylic coating designed to add or change the color of horizontal concrete surfaces and provide a durable, weather resistant finish, reducing the penetration of water and extending the life of the surface beneath.

Top Professional Deck Finish with Waterproofing Sealer X to provide a 'wet' look and further increase water repellency and longevity of the coating.

Available in:

RECOMMENDED USES

  • FLOORS

  • DRIVEWAYS

  • POOL DECKS

  • CONCRETE WALKWAYS

 

TECHNICAL INFORMATION

RESIN TYPE: 100% Acrylic

 

VOC:

  • Less than 400 g/l.

 

COLORS: 13 Industry Standard Colors

VISCOSITY: 95 - 100

 

FILM THICKNESS: 3-5 Mils per coat

 

COVERAGE

Apply at the rate of 150-300 square feet per gallon, depending upon the condition, texture and porosity of the substrate.

APPLICATION

SURFACE PREPARATION:

Wash surface as needed to ensure a surface free of dirt, oil, chalk, efflorescence, or other foreign contaminants. After washing, rinse with clean water and allow surface to dry completely. Remove any failing pant by scraping or wire brushing. Clean any defects in the surface and patch with an appropriate cement-patching compound. Open and clean any cracks and fill with a polyurethane caulking compound.

                  

APPLICATION:

Brush, roll, or spray. 

THINNING: No thinning is recommended, however the product may be thinned to desired working consistency.

DRYING TIME:

  • Touch ----------------------1 Hour

  • Recoat Spray ------------- 2 Hours

  • Recoat Brush/Roll --------4 Hours

  • Use (Traffic) ---------------48 Hours

CLEAN UP: Soap and water.

 

CAUTIONS, WARNINGS:

Do not apply when surface temperature, or ambient temperature is below 50 degrees F. Do not apply to exterior surfaces when rain is expected within 24 hours. Keep from freezing. Do not take internally. Keep out of the reach of children.