Professional Interior Latex Wall Sealer is a excellent hiding, quick drying water-based sealer with excellent enamel holdout. It is generally applied to new drywall prior to the application of an enamel finish coat. The product can also be used to seal existing flat paints which can absorb the vehicle components of subsequent finish coats, causing loss of sheen and durability.
RESIN TYPE: 100% Acrylic
FlLess than 100 g/l
COLORS: White, tintable.
VISCOSITY: 99 - 105
FILM THICKNESS: 3-5 Mils per coat
Apply at the rate of 150-300 square feet per gallon, depending upon the condition, texture and porosity of the substrate.
Allow all construction and patching materials to cure completely. Surface must be sound and free of contamination from dirt, wax, oil, grease, etc. If necessary, wash surface with detergent and water then rinse with clean water. Any glossy surface should be lightly sanded to remove the gloss. Remove mildew by washing with a solution of household bleach and wart water then rinsing with clean water.
Brush, roll, or spray.
THINNING: No thinning is recommended.
Touch ----------------------- 1 Hour
Recoat Spray ------------- 2 Hours
Recoat Brush/Roll ------- 4 Hours
CLEAN UP: Soap and water.
Do not apply when surface temperature, or ambient temperature is below 50 degrees F. Do not apply to exterior surfaces when rain is expected within 24 hours. Keep from freezing. Do not take internally. Keep out of the reach of children.