Garage Floor Epoxy
Professional Garage Floor Epoxy is a water-based, two component epoxy specifically designed for use on concrete surfaces. Our Epoxy is low VOC with the ability to re-coat overnight. It also has excellent resistance to flash rusting, early resistance to wash off and water spotting as well as a solvent resistance comparable to solvent-based epoxy systems.
Available in:
RECOMMENDED USES
-
GARAGE FLOORS
-
CONCRETE SURFACES
TECHNICAL INFORMATION
RESIN TYPE: Amine Adduct
VOC:
-
Less than 50 g/l
COLORS: White, tintable.
FILM THICKNESS: 3-5 Mils per coat.
COVERAGE
Apply at the rate of 250 square feet per gallon or less, depending upon the condition, texture and porosity of the substrate.
APPLICATION
SURFACE PREPARATION:
Surface must be sound and free of contamination from dirt, oil, wax, releasing agents, etc. If necessary clean with appropriate cleaner, rinse, and allow to dry completely. New concrete surfaces must be allowed to cure a minimum of 30 days, be acid etched, and allowed to dry thoroughly. Previously treated, stained, or painted surfaces must be sound and clean Test for product compatibility before proceeding.
APPLICATION:
Brush, roll, or spray.
MIXING INSTRUCTIONS:
Stir both Part A and Part B thoroughly before mixing. In a clean container blend Part A with Part B in a ratio of 4:1 by volume. Stir blended components thoroughly.
THINNING: MAK. Thinning is normally not recommended.
DRYING TIME:
-
Touch ----------------------1 Hour
-
Firm -----------------------7 Hours
-
Re-coat --------------------24 Hours
CLEAN UP: Soap and water.