Professional
Professional Series Water Repellent Paints lead the industry in durability, brightness, adhesion and weather resistance. Professional Series can withstand the hottest summers and the coldest winters without fading, chalking or peeling and is the experienced painters go to choice for a longer lasting, cleaner looking finish, GUARANTEED!
Flat
Available in:
RECOMMENDED USES
-
STUCCO
-
BRICK
-
MASONRY
-
WOOD
-
VINYL
-
CONCRETE
-
SIDING
TECHNICAL INFORMATION
RESIN TYPE: 100% Acrylic
VOC:
-
Flat ----------- <250 g/l
COLORS: Over a thousand to choose from
VISCOSITY: 110 - 116
FILM THICKNESS: 3-5 Mils per coat
COVERAGE
Apply at the rate of 150-300 square feet per gallon, depending upon the condition, texture and porosity of the substrate.
APPLICATION
SURFACE PREPARATION:
Allow all construction and patching materials to cure completely. Surface must be sound and free of contamination from dirt, wax, oil, grease, etc. If necessary, wash surface with detergent and water then rinse with clean water. Any glossy surface should be lightly sanded to remove the gloss. Remove mildew by washing with a solution of household bleach and wart water then rinsing with clean water.
PRIMERS:
-
Wood:
-
Professional Wood Primer
-
-
Stucco & Masonry:
-
Professional Concrete Primer
-
APPLICATION:
Brush, roll, or spray.
THINNING: No thinning is recommended.
DRYING TIME:
-
Touch ----------------------- 1 Hour
-
Recoat Spray ------------- 2 Hours
-
Recoat Brush/Roll ------- 4 Hours
CLEAN UP: Soap and water.
CAUTIONS, WARNINGS:
Do not apply when surface temperature, or ambient temperature is below 50 degrees F. Do not apply to exterior surfaces when rain is expected within 24 hours. Keep from freezing. Do not take internally. Keep out of the reach of children.
 |  |
|---|---|
 |  |
 |  |
 |