© 2019 by Spectrum Paint Company

1-602-510-2451   |   jrmiller@spectrumpaint.co

Wood Primer

Professional Wood Primer is a excellent hiding, stain sealing water-based primer for interior and exterior wood. The 100% acrylic formula offers excellent adhesion combined with the flexibility necessary to meet the rigorous demands of an exterior environment. This primer also contains stain inhibitive pigments to prevent tannin staining of the finish coat, and a flash rust inhibitor to prevent nails and other metal from rusting under the coating.

Available in:

RECOMMENDED USES

  • INTERIOR WOOD

  • EXTERIOR WOOD

  • TRIM BOARDS

 

TECHNICAL INFORMATION

RESIN TYPE: 100% Acrylic

 

VOC:

  • Less Than 

 

COLORS: Over a thousand to choose from

VISCOSITY: 95 - 100

 

FILM THICKNESS: 3-5 Mils per coat

 

COVERAGE

Apply at the rate of 150-300 square feet per gallon, depending upon the condition, texture and porosity of the substrate.

APPLICATION

SURFACE PREPARATION:

Allow all construction and patching materials to cure completely. Surface must be sound and free of contamination from dirt, wax, oil, grease, etc. If necessary, wash surface with detergent and water then rinse with clean water. Any glossy surface should be lightly sanded to remove the gloss. Remove mildew by washing with a solution of household bleach and wart water then rinsing with clean water.

                  

APPLICATION:

Brush, roll, or spray. 

THINNING: No thinning is recommended.

DRYING TIME:

  • Touch ----------------------- 1 Hour

  • Recoat Spray ------------- 2 Hours

  • Recoat Brush/Roll ------- 4 Hours

CLEAN UP: Soap and water.

 

CAUTIONS, WARNINGS:

Do not apply when surface temperature, or ambient temperature is below 50 degrees F. Do not apply to exterior surfaces when rain is expected within 24 hours. Keep from freezing. Do not take internally. Keep out of the reach of children.